Raymarine P79 Depth In Hull Transducer | E26001-PZ

Raymarine P79 Overview:

The P79 adjustable, in-hull depth transducer is ideal for boats with fiberglass hulls looking for a fast and easy installation, high-speed performance, or those who want to minimize drag. The transducer installs inside of the boat's hull, transmitting and receiving echoes through the solid fiberglass bottom with no hull protrusion whatsoever.

P79 comes with an innovative flange that installs on the inside of the boat's hull using quick-setting marine epoxy. No cutting or drilling is required. Using built-in markings the flange is aligned to match the deadrise angle of the boat's hull. Once set in place and made liquid-tight, the flange is filled with propylene glycol non-toxic antifreeze and the active transducer cap is attached. Finally, the transducer cap is dialed-in and locked in place for a straight-down beam and maximum echo returns.

Note: Being an in-hull transducer, there is no water temperature sensor on the P79 transducer.

The design of the P79 accommodates a wide range of deadrise angles from 2° to 22°. This transducer is intended for use on vessels with solid fiberglass hulls with a maximum thickness of 5/8". P79 can also be used on aluminium hulls less than 3.8mm (0.125") thick.

Raymarine offers the P79 transducer is multiple configurations to support traditional analogue sailing instruments, NMEA200 Smart devices, as well as dual-frequency (50/200 kHz) fishfinders.

E26001-PZ P79 in-hull transducer:

The E26001-PZ P79 in-hull transducer easily adjusts to hull dead rise angles up to 22º. This ensures that the beam is vertically oriented to receive echoes, resulting in accurate depth readings. Unlike traditional "puck" type transducers, the P79 consists of a base that is bonded to the hull and filled with liquid. The separate transducer then attaches to the base with a twist lock. The sound waves travel more efficiently though the liquid, giving the best possible performance.

Specifications:
• Material: Urethane
• Max Depth (Ft): 1,000
• Frequency (KHz): 50/200 kHz
• Beam Width: 45° / 12°
• Records: Depth
• Hull Material: Solid Fibreglass
• Cable Length (Ft/M): 30 / 9
• Deadrise Angles: 0-22°
• Push-on 1/8” female spade connectors

For i40, i50, iTC-5 & legacy instruments

MANUALS AND GUIDES