Garmin Boat Switch | 010-02735-00

Get the integrated boat experience with Garmin Boat Switch. This all-in-one digital switching solution lets you operate up to 20 circuits right from your compatible GPSMAP or ECHOMAP chartplotter instead of using physical buttons or switches. It offers four different switch types, including on/off for bilge pumps and navigation lights, press-and-hold dimmers for cabin lights, momentary outputs for horns and timers to circulate your livewell pumps. Plus, it provides built-in tank sender detection and calibration for as many as four tanks — including fuel, water and grey water. It installs without special tools and allows you to easily add and name switches on your chartplotter display.

Features:
• All-in-one system replaces existing fuse box and switches on boats for easier control and operation of onboard functions
• Offers control and protection of up to 20 circuits from your compatible GPSMAP or ECHOMAP chartplotter rather than a physical button or switch
• Manage four different output types, including on/off toggle, dimming, momentary on and built-in timer for livewell pumps
• Position, name and remove switches on the easy-to-use chartplotter interface
• Built-in tank sender detection and calibration for as many as four tanks, including fuel, water and greywater
• Easily retrofit into existing boats without special tools, training or configuration by using included 18” flying leads and colour-coded channel wires

Specifications:
Dimensions (WxHxD) (unit only): 9.1″ x 4.2″ x 1.5″ (230 x 106 x 38 mm)
Weight (unit only): 14.1 oz (400 g)
Ambient temperature: -20° C to +55° C
Enclosure water rating: IP65
Communication: CAN-bus NMEA 2000® network, LEN-0
Output:
High side: 13 ch 10A, 7 ch 5A
Output:
Ground contact switch input 15
Bilge pump monitor 2
Analog Input:
Volt: 3 @ 0-16 V +/-1%
Resistance: 2 @ 0-1500 ohm +/- 5%
Power Supply:
Maximum current: 50A
Power off current consumption: 60mA
Supply voltage (12V): 9-16VDC
Connector:
NMEA 2000 Micro 5-pin M12 male
Channels: Molex MX150 L 16 circuits
Power terminal: M6 bolt

In the Box:
Garmin Boat Switch
Garmin Boat Switch Harness X1
Garmin Boat Switch Harness X2
Installation instructions

MANUALS AND GUIDES