Silentwind Wind Generator Charge Controller - 12v | SW214

Hybrid – BOOST Charge Controller with Bluetooth Connection - 12v

The Silentwind charge controller HYBRID BOOST is a combined wind and solar charge controller with an inbuilt micro-controller.

The HYBRID BOOST was especially developed for the Silentwind Generator and enables you to additionally install solar panels up to a wattage of 300 Watt peak or to a maximum current of 20A.

If you are using the ‘Load’ outputs, the charge controller can be configured to automatically switch off those outputs before the batteries are too deeply discharged, or turn on a light when it gets dark and turn off again when the sun rises.

The Silentwind charge controller HYBRID BOOST is a combined wind and solar charge controller with an inbuilt micro-controller.

The HYBRID BOOST was especially developed for the Silentwind Generator and enables you to additionally install solar panels up to a wattage of 300 Watt peak or to a maximum current of 20A.

If you are using the ‘Load’ outputs, the charge controller can be configured to automatically switch off those outputs before the batteries are too deeply discharged, or turn on a light when it gets dark and turn off again when the sun rises.

The Silentwind Generator generates 3 phase AC voltage. In the charge controller AC
is converted to a DC voltage.

There are different models: 12 / 24 or 48 depending on the system voltage of the wind generator. All types of batteries (Gel, AGM, flooded and sealed lead acid and also lithium) can be charged.

The correct maximum charge voltage - depending on the type of battery - must be
adjusted in the setup

MANUALS AND GUIDES