Paguro Marine Generator Installation Kit

All kits including the following items:
• Sea water supply system using bronze or DZR hull fittings and including water hose
• Fuel supply system with fuel filter/water separator and A1 grade fuel hose
• Exhaust system with Lloyds-approved exhaust hose and a waterlock/muffler
• Hose Clips for all the above hose
• AC electrical protection system in enclosure and Shore/Off/Gen Changeover switch

You can use the main engine start battery, otherwise you will require:
• Start battery 55 Ah
• Battery box (if battery used)

Additionally, for a standard installation, you will typically need the following items:
• Sealant - 3M: 4200, 5200 or SIKA: 221
• Fuel supply - tank standpipe fittings may be required
• Fuel return - tank pipe fittings (if used)
• Pos and Neg battery cables - 2.5 mm² (2 minimum)
• Suitable mounting base e.g. 1" marine ply