Firm favourite
Our best seller; the Paguro 4000 has been around for many years and is a well known firm favourite. Retaining the fundamentals of its original design, it has been developed over the years and is recognised around the world under various badges – early HFL, Mastervolt, Dolphin by GenACis and Westerbeke.

Clean sine wave
Using modern skew cut synchronous alternator windings producing a clean sine wave, the Paguro 4000 is excellent for running TV, laptops and other common domestic equipment.

High start load capability
The oversized synchronous alternator delivers high start load capability – over 300%, great for starting power hungry equipment such as multiple air conditioning units, watermakers and for those of you who are diving enthusiasts, will even start and run a Bauer Junior of Coltri Sub dive compressor.

Optimum performance using raw water cooling
Cooled via a large stainless steel water jacket, your Paguro 4000 will produce an excellent level of continuous power and will not de-rate when being used in higher temperatures. By using raw water cooling to remove heat from the alternator and then the engine, there is no residual build up of heat in the compartment in which the generator is mounted as would happen with air cooled generators.

Peace and quiet
An enhanced triple skin soundproof capsule with advanced anti-vibration feet (internal and external), ensure noise and vibration are kept to a minimum and you (and your neighbours!) can relax on board with all the power you need.

Easy to operate
Your Paguro 4000 comes complete with an easy to read remote control panel and 13m cable, ensuring it can be sited in a convenient location on your boat. It has a unique real time power monitor so that you can see ‘at a glance’ how much power you are using and how much is available.

Energy saving
Using just 0.35 litres of diesel per kW (being used) per hour equates to a likely average consumption of less than 1 litre of fuel per hour.

Engineered for simplicity and reliability
Manufactured using proven techniques and high grade materials to ensure a long life in the marine environment; for example, the water cooling jacket and exhaust manifold are fabricated in 316L austenitic stainless steel to prevent corrosion, enabling optimum raw water cooling.

Easy to service
The split capsule can be easily removed, allowing access to all service points. Fitted with an oil change hand pump, servicing is a clean and simple job.